JouYang Electrical: power relay manufacturer and power relays design in China.

Established in 1990, China JouYang Electrical Products Co.,Ltd. is known as a leading power relay manufacturer and designer of high and low-voltage electric appliance in China. We integrate scientific research, development, production, sale and service in one company. Our custom power relays products are characterized by their superior dustproof, splash-proof, anticorrosion, fire-resistant, thermo-stability and aging-resistant properties. Having received ISO9001 certification for our manufacturing and sales systems, we have also been issued European 'CE' and Chinese 'CCC' safety authorizations for our products. All of our OEM power relay products are strictly according to IEC/GS/EMC/LICE/UL/CSA standard and guaranteed by People's insurance Corporation of China (PICC).

30 Amps Switching on all Contacts through a DPDT Configuration (25 Amps in Europe)
Coil Molded in DuPont Rynite Providing Class F Temperature Insulation
Low Cost Alternative to Small Contactors
CONTACT DATA
CONFIGURATION: Thru DPDT, Including SPST-NO-DM, SPST-NC-DB and DMDB
MATERIALS: All Contacts 1/4" Silver Cadmium Oxide
Coil Voltages: USA/Canada European AC: Up to 277 Volts/60 Hz Up to 250 Volts 50/60 Hz DC: Up to 125 Volts Up to 125 Volts
Coil Treatment: Molded Rynite Std. Class F
Insulation Resistance: 100 Megohms Minimum
UL Insulation System File No.: E74443 S155D 155°C Total Temperature Std. (Covers S105 Class A and S130D Class B Requirements)
OPERATE DATA
Pick Up (at 25°C): AC Volts 85% or Less of Nominal DC Volts 75% or Less of Nominal
Operate Time: Approx. 15 Milliseconds
Release Time: Approx. 15 Milliseconds
ENVIRONMENTAL DATA
Operating Ambient: AC: -45° to 75°C DC: -45° to 80°C
Coil Temperature Rise: (25°C Ambient - Continuous Duty) AC: 45°C Approx. @ 60 Hz - Use at 50 Hz will Cause Slight Increase in Coil Rise DC: 40°C Approx.
EXPECTED LIFE
Electrical At Rated Load (Minimum) 100,000 Operations
Mechanical Life 10,000,000 Operations
DIELECTRIC STRENGTH 1200 VRMS, 60 Hz Between Contacts 2200 VRMS, 60 Hz Between Other Elements
MECHANICAL DATA
Terminals: All Versions (Except P Suffix) .250" x .032" Quick Connect/Solder P Suffix Version Printed Circuit Pins
Cover: Clear Polycarbonate - Flammability Rating 94V2
Weight: Approx. 3 oz. (85 g)

MINIPORT-30 Power Relay is a 30 amp, contactor switched 120 VAC outlet.
Remote control via safe, inexpensive, low voltage Class 2 wiring.
This model includes an internal 12 VDC supply and can be controlled from a remote location by using the Furman PowerLink Remote AC Power Sequence Controller.
Turn-off always occurs simultaneously.
All four sides of the enclosure have multiple knockouts to accommodate every installation, with 34 conduit- one on the top surface, the other on the bottom.
The MINIPORT-30 Power Relay is a 30 amp, contactor switched 120 VAC outlet, with a terminal strip that allows remote control via safe, inexpensive, low voltage Class 2 wiring. The MINIPORT-30 provides a twistlock inlet and outlet, and is housed in a heavy duty steel, 8 x 8 x 4 junction box. ppThis model includes an internal 12 VDC supply, and can be controlled from a remote location by using the Furman PowerLink Remote AC Power Sequence Controller the ASD-120 Sequenced Power Distro, or for simpler jobs, the Furman RS-1 or RS-2 Remote System Control panels. The RS-1 provides a maintained key switch the RS-2 has a momentary switch. ppMultiple MINIPORTs have their control wiring paralleled so that all are controlled by a single switch closure, and may be linked so that all turn on simultaneously or one by one, in a delayed sequence. If delayed operation is chosen, the delay interval between the turn-on of one MINIPORT and the next is approximately 3 seconds.

power relays show

	30 Amps Switching on all Contacts through a DPDT Configuration (25 Amps in Europe) Coil Molded in DuPont Rynite Providing Class F Temperature Insulation Low Cost Alternative to Small Contactors CONTACT DATA CONFIGURATION: Thru DPDT, Including SPST-NO-DM, SPST-NC-DB and DMDB MATERIALS: All Contacts 1/4" Silver Cadmium Oxide Coil Voltages: USA/Canada European AC: Up to 277 Volts/60 Hz Up to 250 Volts 50/60 Hz DC: Up to 125 Volts Up to 125 Volts Coil Treatment: Molded Rynite Std. Class F Insulation Resistance: 100 Megohms Minimum UL Insulation System File No.: E74443 S155D 155°C Total Temperature Std. (Covers S105 Class A and S130D Class B Requirements) OPERATE DATA Pick Up (at 25°C): AC Volts 85% or Less of Nominal DC Volts 75% or Less of Nominal Operate Time: Approx. 15 Milliseconds Release Time: Approx. 15 Milliseconds ENVIRONMENTAL DATA Operating Ambient: AC: -45° to 75°C DC: -45° to 80°C Coil Temperature Rise: (25°C Ambient - Continuous Duty) AC: 45°C Approx. @ 60 Hz - Use at 50 Hz will Cause Slight Increase in Coil Rise DC: 40°C Approx. EXPECTED LIFE Electrical At Rated Load (Minimum) 100,000 Operations Mechanical Life 10,000,000 Operations DIELECTRIC STRENGTH 1200 VRMS, 60 Hz Between Contacts 2200 VRMS, 60 Hz Between Other Elements MECHANICAL DATA Terminals: All Versions (Except P Suffix) .250" x .032" Quick Connect/Solder P Suffix Version Printed Circuit Pins Cover: Clear Polycarbonate - Flammability Rating 94V2 Weight: Approx. 3 oz. (85 g)
	MINIPORT-30 Power Relay is a 30 amp, contactor switched 120 VAC outlet. Remote control via safe, inexpensive, low voltage Class 2 wiring. This model includes an internal 12 VDC supply and can be controlled from a remote location by using the Furman PowerLink Remote AC Power Sequence Controller. Turn-off always occurs simultaneously. All four sides of the enclosure have multiple knockouts to accommodate every installation, with 34 conduit- one on the top surface, the other on the bottom. The MINIPORT-30 Power Relay is a 30 amp, contactor switched 120 VAC outlet, with a terminal strip that allows remote control via safe, inexpensive, low voltage Class 2 wiring. The MINIPORT-30 provides a twistlock inlet and outlet, and is housed in a heavy duty steel, 8 x 8 x 4 junction box. ppThis model includes an internal 12 VDC supply, and can be controlled from a remote location by using the Furman PowerLink Remote AC Power Sequence Controller the ASD-120 Sequenced Power Distro, or for simpler jobs, the Furman RS-1 or RS-2 Remote System Control panels. The RS-1 provides a maintained key switch the RS-2 has a momentary switch. ppMultiple MINIPORTs have their control wiring paralleled so that all are controlled by a single switch closure, and may be linked so that all turn on simultaneously or one by one, in a delayed sequence. If delayed operation is chosen, the delay interval between the turn-on of one MINIPORT and the next is approximately 3 seconds.
Electrical Products