TROLLING MOTOR CIRCUIT BREAKER KIT Protects trolling motors from damage. Contains a 50 Amp circuit breaker and 3 of 8-gauge wire to battery. Kit also includes a mounting box, fasteners and a second ring terminal for attaching the trolling motor wire. Circuit breaker for all Power Probe circuit testers. 6-24V. 8 AMP rated. The product is suitable to be used in circuit of rated voltage up to AC 660V 50/60Hz, rated current from 0.1A to 63A. It is applicable to the protection of overload and short circuit of three-phase squirrel-cage motors. It also can be used as direct starter to start the motor and as a switch to changeover the circuit under normal conditions. PKZM0 series MPCBs are applicable for the circuit of AC 50Hz or 60Hz, rated insulation voltage 750V, rated operating voltage up to 660V, rated operation current from 0.1A to 25A.

Specifications: Jcm7(3vu) series motor protection circuit breaker is suitable to be used in circuit of rated voltage up to AC 660v 50/60hz, rated current from 0.1a to 63a. It is applicable for protection of overload & short circuit of 3 phase squirrel-cage motors. It also can be used as direct starter to start the motor and a switch for changeover the circuit under normal conditions. Payment Terms: L/C,T/T. Specifications: DZ518(GV) series motor protection circuit breaker are mainly used fro the overload and short circuit protection of the motor in AC 50/60Hz, up to 660V, 0.1-32A power circuit, as a full-voltage starter to start and cut off the motor, under the AC3 load or fro the overload and short circuit protection of the circuit and power equipment in the power distribution network. They are used for protecting motors against overload, short-circuit and phase-failure. They can also be used for starting and stopping starters for motors.