Can be used to provide power to all 12- volt lights
Available in different sizes and features
Product may differ from photo depending upon vender's shippment
10 amp 12 or 24 volt power transformer Single phase buck boost transformer design for use to supply 12 or 24 volt secondaries with 120 volt primary. .250 kVA, 60 Hz, 250 watt 10 amp at 24 volt. UL listed and CSA approved for indoor and outdoor use. Knock outs and keyhole mounting holes for easy installation. Weight is 5.7 pounds. Dimensions 8 inches x 3 3/8 inches x 2 3/4 inches. Optimal internal layout to minimize the HV interconnections.
Built in reliability - TR sets are designed for 24 X 7 operation in adverse Environmental conditions
Can withstand continuous "Open Circuit" OR "Short Circuit" conditions.
High Life Expectancy through Design

BGS 3-phase, BGD single phase Dry Type /S Oil-Dip Type Low Consumption 3-phase (Self-Coupling Type, Sensitive Type) Low Voltage Power Transformer is designed because the voltage of the imported equipment is different from the voltage of Chinese
power network.It can transfer the 380V voltage into different kinds of voltages, the designed voltages are:
Input: 380V, 400V,420V, 600V etc.
Output: 480V, 460V, 380V, 240V, 220V, 200V, 127V, 110V, 100V, 36V, 24V etc.
Pre-wired 12v, dimmable electrical transformers.
Full VDE certification for low voltage and EMC.
Fitted with soft start, which prolongs the life of the lamp
Short-circuit and overload protection, the transformer will shut off automatically in the case of short circuit or overload, after removing the cause of the short circuit or overload the transformer will start to supply the load again.
In the event of over temperature the transformer will cut the load by means of a thermal fuse.
European manufacture
CE marked, VDE Approved.
Input Mains: 220 to 240VAC 50Hz
Loading must be in the range of 75 to 200 Watts (200VA max)
Additional notes when installing.