JouYang Electrical: conductivity meter manufacturer and conductivity meters design in China.

Established in 1990, China JouYang Electrical Products Co.,Ltd. is known as a leading conductivity meter manufacturer and designer of high and low-voltage electric appliance in China. We integrate scientific research, development, production, sale and service in one company. Our custom conductivity meters products are characterized by their superior dustproof, splash-proof, anticorrosion, fire-resistant, thermo-stability and aging-resistant properties. Having received ISO9001 certification for our manufacturing and sales systems, we have also been issued European 'CE' and Chinese 'CCC' safety authorizations for our products. All of our OEM conductivity meter products are strictly according to IEC/GS/EMC/LICE/UL/CSA standard and guaranteed by People's insurance Corporation of China (PICC).

6 selectable units of measurement: mS, mS, ppm, ppt, mg/L and g/L
Automatic temperature compensation
Automatic self calibration
Stores/recalls up to 15 labeled readings
Adjustable conductivity to TDS ratio factor from 0.4 to 1.0
Our mini rake is designed to clean even the tightest corners. Its flexible, flat tines allow for thorough and fast clean-up. Though, not required for use, this item will also work with any of our Multi-Star handles for additional leverage. TDS/Conductivity/Salinity Pen, TDS Range 0.1 Ppm (mg/L) To 9.99 Ppt (g/L), Electric Conductivity Range 0.1 uS/cm To 19.99 mS/cm. Automatic Temperature Compensation. 1 point manual calibration. Large and easy to read display.
This sturdy meter measures up to three different ranges with auto-ranging capability that switches to appropriate measuring range automatically. Included with the meter are a two-pin stainless steel conductivity electrodes with built-in temperature sensor (for ATC), a rubber boot, 4 x alkaline ‘AAA’ batteries, instruction manual and soft carrying pouch.

Provides a fast and dependable way to measure the Total Dissolved Solids in your fountain solution from 0-to-1999 µS/cm with readouts in 1 µS/cm. It is ideally suited for frequent conductivity readings with its easy-to-read LCD. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature. Quality Control has never been easier. The conductivity meter uses a single button at the top of the meter. Press it once and the meter is powered and ready for use. Press and hold the button for a few seconds and the meter automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds, the meter recognizes the calibration solution and calibrates itself!Conductivity Meter is supplied complete with batteries and instructions.Overall Size:1/2" x 2" x 7"Use with calibration solution such as item 7081Country of Origin: Mauritius

conductivity meters show

	6 selectable units of measurement: mS, mS, ppm, ppt, mg/L and g/L Automatic temperature compensation Automatic self calibration Stores/recalls up to 15 labeled readings Adjustable conductivity to TDS ratio factor from 0.4 to 1.0 Our mini rake is designed to clean even the tightest corners. Its flexible, flat tines allow for thorough and fast clean-up. Though, not required for use, this item will also work with any of our Multi-Star handles for additional leverage. TDS/Conductivity/Salinity Pen, TDS Range 0.1 Ppm (mg/L) To 9.99 Ppt (g/L), Electric Conductivity Range 0.1 uS/cm To 19.99 mS/cm. Automatic Temperature Compensation. 1 point manual calibration. Large and easy to read display. This sturdy meter measures up to three different ranges with auto-ranging capability that switches to appropriate measuring range automatically. Included with the meter are a two-pin stainless steel conductivity electrodes with built-in temperature sensor (for ATC), a rubber boot, 4 x alkaline ‘AAA’ batteries, instruction manual and soft carrying pouch.
	Provides a fast and dependable way to measure the Total Dissolved Solids in your fountain solution from 0-to-1999 µS/cm with readouts in 1 µS/cm. It is ideally suited for frequent conductivity readings with its easy-to-read LCD. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature. Quality Control has never been easier. The conductivity meter uses a single button at the top of the meter. Press it once and the meter is powered and ready for use. Press and hold the button for a few seconds and the meter automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds, the meter recognizes the calibration solution and calibrates itself!Conductivity Meter is supplied complete with batteries and instructions.Overall Size:1/2" x 2" x 7"Use with calibration solution such as item 7081Country of Origin: Mauritius
Electrical Products