200uF 100V Non-Polarized Capacitor
These high quality Bi-polar (non-polarized) electrolytic capacitors are perfect for your next crossover design. They feature a 5% dissipation factor and are rated at 100V which are effective to approximately 200 watts.
The standard Y case (7.3 x 4.3 x 2mm; length x width x height) now features 150uF rated at 6.3V, with the W case size (6 x 3.2 x 1.5mm; l x w x h) benefiting from 100uF rated at 4V. High quality Xicon miniaturized capacitors utilize case sizes smaller than conventional general purpose caps while maintaining very high performance, low impedance characteristics, 20% tolerance, and an operating temperature of -40° to +85° C. Cap sizes larger than 8mm diameter utilize safety vents on rubber end seal.

Mallory 150 series .001mfd tone capacitor. This premium quality cap is suitable for both guitar and bass tone circuits. 5% tolerance.
Capacitors: SMD ceramic at top left; SMD tantalum at bottom left; through-hole capacitar tantalum at capactor top right; through-hole electrolytic at bottom right. Major scale divisions are cm.
A capacitor is an electrical device that can store energy in the capacitor electric field capacitors between a pair of closely spaced conductors (called 'plates'). When voltage is applied to the capacitor, electric charges of capacitor and resistor technology symposium equal magnitude, but opposite polarity, build up on each oil filled capacitor plate.
Capacitors are used in electrical circuits as energy-storage devices. They can also be used to differentiate between jensen motor run capacitor high-frequency and low-frequency signals and this makes them useful in electronic filters.
Capacitors are occasionally referred to as condensers. This ceiling fan capacitor is now considered an antiquated term.